6
72 Workshop Manual, TPD 1377E, issue 4
100 Series
Max fuel screw and max speed screw
To locate Operation 6-8
Notes:
The max fuel screw (A1) and max speed screw (A2) should not be adjusted by the operator.
An anti tamper device (A3) may be fitted. Where this device is present, see Operation 6-9.
If adjustment of the maximum fuel screw or the no load speed is necessary, the adjustment must be done
on an engine test facility by personnel approved by Perkins Engines Company Ltd.
1
2
3
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
