11
Workshop Manual, TPD 1377E, issue 4 103
100 Series
Banjo Bolt Operation 11-7
The torque setting for the banjo bolt (A1), fitted to the fuel injection pump, for the 103-10 engines (KD) is
20,0 Nm (14.75 lbf ft) 2,04 kgf m. The torque setting for all other engines is 7,0 Nm (5.16 lbf ft) 0,71 kgf m.
1
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
