Piper Dakota - Page 14

LIST OF ILLUSTRATIONS (cont)
FIGURE NO. SUBJECT GRID NO.
95-1. Tire Balancer Fixture 3D4
95-2. Control Surface Balancing Tool 3D5
95-3. Orifice Replacement Tool 3D6
95-4. Fabricated Tool for Baggage Door Lock 3D7
95-5. Retainer Ring Tool 3D7
95-6. Fabricated Aileron Bellcrank Rigging Tool 3D8
95-7. Fabricated Rudder Rigging Tool 3D8
95-8. Fabricated Aileron and Flap Rigging Tool 3D9
95-9. Fabricated Stabilator Rigging Tool 3D10
95-10. Charging Stand 3D11
95-11. York Compressor and Fabricated Oil Dipstick 3D11
95-12. Ignition Harness Ferrule Seating Tool 3D12
95-13. Assembly Tool for Ignition Harness Insulating
Sleeve Installation 3D12
—NOTE—
Refer to Grid No. 3B15 for Electrical Schematic Index.
Introduction
Page - 13
Reissued: August 1, 1986
1A14
PIPER AIRCRAFT
PA-28-236
MAINTENANCE MANUAL