Piper Dakota - Page 31

PERIODIC INSPECTIONS (cont)
—NOTE—
Perform all inspections or operations at each inspection intcrval as
indicated by a circle (O).
Nature of Inspection
F. LANDING GEAR GROUP (cont)
6. Remove wheels. Clean, check, and repack bearings ............................................... O O O
7. Inspect wheels for cracks, corrosion, and broken bolts........................................... O O O
8. Check tire pressure. ................................................................................................. O O O O
9. Inspect brake lining and disc for condition and wear.............................................. O O O
10. Inspect brake backing plates for condition and wear............................................... O O O
11. Inspect brake lines ................................................................................................... O O O
12. Inspect shimmy dampener....................................................................................... O O O
13. Inspect gear forks for damage.................................................................................. O O O
14. Inspect oleo struts for fluid leaks and scoring......................................................... O O O
15. Inspect gear struts, attachments, torque links, and bolts for condition
and security.............................................................................................................. O O O
16. Inspect all hydraulic lines, electrical leads, and attaching parts for security,
routing, chafing, deterioration, wear, and correct installation ................................ O O O
17. Lubricate per lubrication chaft. (Refer to chapter l2.)............................................. O O O O
18. Remove airplane from jacks ................................................................................... O O O
G. OPERATIONAL INSPECTION
1. Check fuel pump and fuel tank selector................................................................... O O O O
2. Check fuel quantity, pressure, and flow readings ................................................... O O O O
3. Check oil pressure and temperature ........................................................................ O O O O
4. Check alternator output............................................................................................ O O O O
5. Check manifold pressure ......................................................................................... O O O O
6. Check carburetor heat ............................................................................................. O O O O
7. Check parking brake................................................................................................ O O O O
8. Check operation of auxiliary vacuum pump system. (If installed.)
(See Note 20.).......................................................................................................... O O O
50
500
1000
100
Inspection Time (HRS)
PIPER AIRCRAFT
PA-28-236
MAINTENANCE MANUAL
5 - 21 - 00
Page -5 - 08
Reissued: August 1, 1986
1B7