PIXELHUE P20 - Page 163

All-New Event Presentation Switching Solutions
User Manual
7 Event Management Software PixelFlow
www.pixelhue.com
157
Interface Example (P20)
Description
On the Basic tab interface, configure the following parameters.
Parameter
Description
Mask
Turn on or turn off the function.

: On

: Off
Mask Top
Set the masked area height from the top edge of the layer.
Mask Bottom
Set the masked area height from the bottom edge of the layer.
Mask Left
Set the masked area width from the left edge of the layer.
Mask Right
Set the masked area width from the right edge of the layer.
Configure Layer Color
Configure the layer color parameters.
Prerequisites
The layers is a regular (not AUX) layer.
Notes
None