All-New Event Presentation Switching Solutions
User Manual
P_4K_12G SDI Audio-OPT Combo Card
The P20 is designed with a P_4K_12G SDI Audio-OPT Combo Card which offers the
following input and output connectors.
4x 12G-SDI IN & LOOP (INPUT 9 to 12)
8x optical fiber output ports (OPT)
4K:
Switcher mode
− OPT 1 copies the left half of the output image of HDMI 1.
− OPT 2 copies the right half of the output image of HDMI 1.
− OPT 3 copies the left half of the output image of HDMI 1.
− OPT 4 copies the right half of the output image of HDMI 1.
− OPT 5 copies the left half of the output image of HDMI 5.
− OPT 6 copies the right half of the output image of HDMI 5.
− OPT 7 copies the left half of the output image of HDMI 5.
− OPT 8 copies the right half of the output image of HDMI 5.
PGM only mode
− OPT 1 copies the left half of the output image of HDMI 1.
− OPT 2 copies the right half of the output image of HDMI 1.
− OPT 3 copies the left half of the output image of HDMI 3.
− OPT 4 copies the right half of the output image of HDMI 3.
− OPT 5 copies the left half of the output image of HDMI 5.
− OPT 6 copies the right half of the output image of HDMI 5.
− OPT 7 copies the left half of the output image of HDMI 7.
− OPT 8 copies the right half of the output image of HDMI 7.
DL:
Switcher and PGM only modes
− OPT 1 copies HDMI 1.
− OPT 2 copies HDMI 1.
− OPT 3 copies HDMI 3.
− OPT 4 copies HDMI 3.
− OPT 5 copies HDMI 5.
− OPT 6 copies HDMI 5.
− OPT 7 copies HDMI 7.
− OPT 8 copies HDMI 7.
4x 3.5 mm audio jacks (AUDIO) including 2x line in & 2x line out (The audio
function will be implemented in future updates.)
Inputs 1 to 8
Each includes a DP 1.2/HDMI 2.0. When two connectors have signals, only one can
be used as the input source at the same time.
To Next Page
Loading...