All-New Event Presentation Switching Solutions
User Manual
Outputs 1 to 4
Each includes two HDMI 2.0:
4K
− In switcher mode, connectors 1 and 5 work as primary. Connectors 2, 3 and 4
copy connector 1, and connectors 6, 7 and 8 copy connector 5. The
resolutions of connectors 1 and 5 can be set independently.
− In PGM only mode, connectors 1, 3, 5 and 7 work as primary and connectors
2, 4, 6 and 8 copy connectors 1, 3, 5 and 7, respectively. Connector 1 and 3
are in the same group and connectors 5 and 7 are in the same group.
Connectors in the same group have the same resolution.
DL
− In both switcher and PGM only modes, connectors 1, 3, 5 and 7 work as
primary and connectors 2, 4, 6 and 8 copy connectors 1, 3, 5 and 7,
respectively. Connector 1 and 3 are in the same group and connectors 5 and
7 are in the same group. Connectors in the same group have the same
resolution.
Multiviewer output
The P20 is designed with an HDMI 1.3 for Multiviewer output. A Multiviewer display
can be connected, allowing for live monitoring of all the inputs and outputs from one
display. The output resolution is fixed at 1920×1080@60Hz.
AUX Outputs
The P20 comes with four HDMI 1.3 for AUX outputs. Auxiliary devices such as
teleprompters can be connected. The output resolution defaults to
1920×1080@60Hz.
Ethernet Ports
Two Ethernet ports are provided for control and live input view.
One works as primary and the other as backup.
They have the same function and share the same IP address.
Genlock IN & LOOP
Genlock synchronization signal connectors are provided.
GENLOCK IN: Synchronization signal input
GENLOCK LOOP: Synchronization signal loop output
Power Connector and Switch
Power connector and rocker switch
100-240V~, 3.0-1.5A, 50/60Hz
To Next Page
Loading...