All-New Event Presentation Switching Solutions
User Manual
4K:
Switcher mode
− OPT 1 copies the left half of the output image of HDMI 1.
− OPT 2 copies the right half of the output image of HDMI 1.
− OPT 3 copies the left half of the output image of HDMI 1.
− OPT 4 copies the right half of the output image of HDMI 1.
PGM only mode
− OPT 1 copies the left half of the output image of HDMI 1.
− OPT 2 copies the right half of the output image of HDMI 1.
− OPT 3 copies the left half of the output image of HDMI 5.
− OPT 4 copies the right half of the output image of HDMI 5.
SL:
Switcher mode
− OPT 1 copies HDMI 1 and HDMI 2.
− OPT 2 copies HDMI 3 and HDMI 4.
− OPT 3 copies HDMI 1 and HDMI 2.
− OPT 4 copies HDMI 3 and HDMI 4.
PGM only mode
− OPT 1 copies HDMI 1 and HDMI 2.
− OPT 2 copies HDMI 3 and HDMI 4.
− OPT 3 copies HDMI 5 and HDMI 6.
− OPT 4 copies HDMI 7 and HDMI 8.
Audio Jacks (The audio function will be implemented in future updates.)
Four 3.5 mm dual-channel audio jacks are provided, including two line in jacks and
two line out jacks.
Multiviewer Output
The P10 is designed with an HDMI 1.3 for Multiviewer output. A Multiviewer display
can be connected, allowing for live monitoring of all the inputs and outputs from one
display. The output resolution is fixed at 1920×1080@60Hz.
AUX Outputs
The P10 comes with two HDMI 1.3 connectors for AUX outputs. Auxiliary devices
such as teleprompters can be connected. The output resolution defaults to
1920×1080@60Hz.
Outputs 1 to 8
The P10 provides eight HDMI output connectors including two HDMI 2.0 and six
HDMI 1.3.
4K:
To Next Page
Loading...