Polaris RANGER XP 1000 2018 - Page 295

5
9928487 R01 - 2018 RANGER XP 1000 Service Manual
© Copyright Polaris Industries Inc.
5.15
10.Install the two fastening nuts
u
.
11. Torque the clutch cover fasteners
i
.
TORQUE
Clutch Cover Fasteners
50 ft-lbs (68 Nm)
12.Torque the mounting fasteners
o
.
TORQUE
Transmission Mount to Engine Fasteners
37 ft-lbs (50 Nm)
13.Secure fuel line clip
a
to clutch cover.
14.Clean the inside of the drive clutch and the engine
crankshaft with alcohol. Allow parts to dry before
proceeding.
15.Install the Driven Clutch assembly. Ensure the Driven
Clutch assembly is nearly flush with the Transmission
Input shaft.
WARNING
The Driven Clutch Bolt will engage the threads of the
Input Shaft without the Driven Clutch being fully mated
to the Input Shaft. Damage can occur to the clutch and
Input Shaft if the Driven Clutch is not flush with the
Input Shaft.
PVT SYSTEM