Quantum SPARK 1500 - Page 158

Configuring Administrator Access
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|158
To log in to the WebUI with Two-Factor Authentication
1. On the appliance Login page, enter your administrator name and password.
The Two-Factor Authentication screen appears.
2. Use one of these options to receive your verification code:
n
Select the two checkboxes SMS and Email
Note - To log in with this authentication option, the gateway must be
connected to the Internet.
n
Select only the SMS checkbox
Note - To log in with this authentication option, the gateway must be
connected to the Internet.
n
Select only the Email checkbox
Note - To log in with this authentication option, the gateway must be
connected to the Internet.
n
Click Authenticator app
Note - After the initial authentication, you can use the time-based code
generated in the Authenticator app to log in even when the gateway is
not connected to the Internet.
Description
Enter the verification code that you receive based on the selected login option:
l
From the SMS.
l
From the email.
l
From the Authenticator app.
3. Click Next.
4. Enter the verification code you received and click Next.
5. If you did not receive a code, click Resend code or Try another way to receive the
code by another method.