Configuring Administrator Access
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|159
To log in to the command line with Two-Factor Authentication
1. Connect to the command line on the appliance.
2. Enter your username and password.
3. Enter the number of your choice of how to receive the verification code.
4. Enter the verification code.
To receive new Two-Factor Authentication keys for a specific administrator
1. Go to the Device >System >Administrators page.
2. Select the administrator.
3. Click the Regenerate Keys button.
Note - This invalidates the current secret key and emergency keys.
The new keys are sent to the email address of the selected administrator. Verify that you
received the email and set the Authenticator app with the new secret key to allow login via
the Authenticator app.
To Next Page
Loading...
