Quantum SPARK 1500 - Page 82

Managing the Device
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|82
In the NAT Settings section, configure the applicable settings.
Configuration
Do not hide internal networks behind this Internet connection
Controls whether to disable NAT for traffic from your internal networks that
goes through this Internet connection.
In the Bond Settings section, configure the applicable settings.
Configuration
n
Hash policy
Configures the Bond hash policy (how to assign connections to Active
subordinate interfaces):
l
Layer2 - Based on the XOR of hardware MAC addresses.
l
Layer2+3 - Based on the XOR of hardware MAC addresses and
IP addresses.
l
Layer3+4 - Based on the IP addresses and Ports.
n
MII interval
Configures the Bond Media Monitoring Interval (MII) that specifies how
much time in milliseconds to wait before checking the link on
subordinate interfaces for a failure.
In the DHCP Settings section, configure the applicable settings.
Configuration
Hostname via DHCP
Controls whether the appliance gets its hostname from your DHCP server.