Quantum SPARK 1500 - Page 83

Managing the Device
R81.10.X Quantum Spark 1500, 1600, 1800, 1900, 2000 Appliances Locally Managed Administration Guide|83
In the SD-WAN Settings section, configure the applicable settings.
Configuration
n
Download speed (Mbps)
Configures the restriction for the inbound traffic (download on the
internal networks behind the appliance) if this Internet connection
participates in SD-WAN.
n
Upload speed (Mbps)
Configures the restriction for the outbound traffic (upload on the internal
networks behind the appliance) if this Internet connection participates in
SD-WAN.
n
This Internet connection will be a part of SD-WAN
Configures this Internet connection to participate in SD-WAN.
Refer to the Access Policy view > Firewall section > SD-WAN page.
n
This Internet connection will be set as backup in SD-WAN
Configures this Internet connection to participate in SD-WAN as a
backup for the main SD-WAN Internet connection. Select this only for
links that are expensive or of poor quality. For example, Cellular
networks have a plan, and if you exceed your limit it can be costly. In the
MPLS network, you pay per use.
4. Click Save.