80
• Enable new gimbal controls
• Turn on/off gimbal joystick speed factor
• Set gimbal slide speed factor.
Plan View: Entering the Default Mission Altitude value here sets the altitude in the Plan
Screen at which missions fly by default, unless otherwise specified.
Cursor On Target (COT): This is currently still under development at the time of this
publication.
Video & Video Recording: These settings are automatic and are not customizable at the
time of this publication.
Picture Settings: Configures full-resolution images whenever a snapshot is taken.
This function must be enabled before flight or else photos will not
be stored locally on the GCS and will not be transferrable after the
To Next Page
Loading...