● In the case of a.c. operation, by arranging usual RC interference sup‐
pression elements depending on the contactor type, immediately at the
inductance
Only the interference suppression element arranged immediately at the in‐
ductance does serve this purpose. Otherwise, the emitted noise level is too
high which can affect the function of the electronic system and of the drive.
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
Bosch Rexroth AG 213/309
Arranging the Components in the Control Cabinet
To Next Page
Loading...
