1.3 Drive System Rexroth IndraDrive M - Modular System
Rexroth IndraDrive M is the modular system type of the Rexroth IndraDrive
product range.
The combination of an HMV supply unit and HMS and HMD drive controllers
to form a modular drive system allows operating several motors.
Basic features of the product range Rexroth IndraDrive M:
● Scaleable power supply
● Integrated mains contactor (except for HMV01.1R-W0120)
● Modular extension of number of axes is possible
● Two series (mounting depths) of HMV and HMS available
● Additional components:
– DC bus resistor units
– DC bus capacitor units
The figure below illustrates the system structure of the drive system
Rexroth IndraDrive M. Allowed combinations of components: See chapter 8
"Configuring the Drive System" on page 93
Bosch Rexroth AG DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
14/309
System Presentation
To Next Page
Loading...
