1007 001 Development [0 or 1 / 1 / 1 /step]
0: OFF, 1: ON
1007 002 PCU
1007 003 Transfer
1007 004 Int. Transfer
1007 005 Transfer Roller
1007 006 Fuser
1007 007 Fuser Oil
1101 [ToneCtlSet]
1101 001 Tone (Factory) Recalls a set of gamma settings. This can be either a)
the factory setting, b) the previous setting, or c) the
current setting.
1101 002 Tone (Prev.)
1101 003 Tone (Current)
1102 [ToneCtlSet]
Sets the printing mode (resolution) for the printer gamma adjustment. The asterisk (*)
shows which mode is set.
• 00: *1200x1200Photo (1 bit, 4 colors)
• 01: 600x600Photo (4 bits, 4 colors)
• 02: 600x600Photo (2 bits, 4 colors)
• 03: 600x600Photo (1 bit, 4 colors)
• 04: 1200x1200Text (1 bit, 4 colors)
• 05: 600x600Text (4 bits, 4 colors)
• 06: 600x600Text (2 bits, 4 colors)
• 07: 600x600Text (1 bit, 4 colors)
1103 [PrnColorSheet]
1103 001 ToneCtlSheet Prints the test page to check the color balance before
and after the gamma adjustment.
1103 002 ColorChart
5. System Maintenance Reference
266