1-103-017 Ex.Idling Time(H) *ENG [ 0 to 60 / 0 / 1 sec/step]
Specifies the idling time in the high
temperature condition.
1-103-018 Ex.Idling Time(M) *ENG [ 0 to 60 / 0 / 1 sec/step]
Specifies the idling time in the middle
temperature condition.
1-103-019 ExIdl Temp:PRoll *ENG [ 0 to 160 / 110 / 1 deg/step]
Specifies the threshold temperature of
the pressure roller for idling extention
mode.
1104
[Fusing Idling BF]
MT: Middle Thick, PR: Pressure Roller
1-104-001 Envir. Thresh *ENG [0 to 2 / 2 / 1 /step]
Selects the environmental
condition.
0: LL condition
1: LL and MM condition
2: All condition
1-104-002 Idl Temp:P-Roll *ENG [0 to 160 / 160 / 1 deg /step]
Specifies the threshold temperature for the pressure roller idling before a job.
1-104-003 Idling Time:BW *ENG Specifies the fusing idling time for
each printe mode before a job.
[0 to 10 / 2 / 1 sec/step]
1-104-004 Idling Time:FC *ENG
1-104-005 Idl Time:MTh:BW *ENG
1-104-006 Idl Time:MTh:FC *ENG
007-009 Specifies the thereshold temperature of the paper feed before a job.
1-104-007 P.FeedTemp:P-Roll *ENG [0 to 160 / 90 / 1 deg/step]
1-104-008 P.F Temp:MT:PR:BW *ENG [0 to 160 / 100 / 1 deg/step]
1-104-009 P.F Temp:MT:PR:FC *ENG [0 to 160 / 100 / 1 deg/step]
5. System Maintenance Reference
274
To Next Page
Loading...
