1-003-003 Tray1:Thick1 *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-004 Tray234:Plain *ENG [–20 to 20 / -1 / 1 mm/step]
1-003-005 Tray234:MThick *ENG [–20 to 20 / -1 / 1 mm/step]
1-003-006 Tray234:Thick1 *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-007 By-pass:Plain *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-008 By-pass:MThick *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-009 By-pass:Thick1 *ENG [–20 to 20 / -4 / 1 mm/step]
1-003-010 Duplex:Plain *ENG [–20 to 20 / -2 / 1 mm/step]
1-003-011 Duplex:MThick *ENG [–20 to 20 / -2 / 1 mm/step]
1-003-012 Duplex:Thick1 *ENG [–20 to 20 / -4 / 1 mm/step]
1-003-013 Tray1:Plain:1200 *ENG [–20 to 20 / -1 / 1 mm/step]
1-003-014 Tray1:M-Thick:1200 *ENG [–20 to 20 / -1 / 1 mm/step]
1-003-015 Tray1:Thick1:1200 *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-016 Tray234:Plain:1200 *ENG [–20 to 20 / -1 / 1 mm/step]
1-003-017 Tray234:M-Thick:1200 *ENG [–20 to 20 / -1 / 1 mm/step]
1-003-018 Tray234:Thick1:1200 *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-019 By-pass:Plain:1200 *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-020 By-pass:M-Thick:1200 *ENG [–20 to 20 / -3 / 1 mm/step]
1-003-021 By-pass:Thick1:1200 *ENG [–20 to 20 / -4 / 1 mm/step]
1-003-022 Duplex:Plain:1200 *ENG [–20 to 20 / -2 / 1 mm/step]
1-003-023 Duplex:M-Thick:1200 *ENG [–20 to 20 / -2 / 1 mm/step]
1-003-024 Duplex:Thick1:1200 *ENG [–20 to 20 / -4 / 1 mm/step]
1103 [Fusing Idling] Fusing Idling Adjustment
1-103-016 Ex.Idling Time(L) *ENG [ 0 to 60 / 20 / 1 sec/step]
Specifies the idling time in the low
temperature condition.
Engine SP Mode Tables: SP1000
273
To Next Page
Loading...
