Ricoh Aficio SP C440DN User Manual

1-105-233 F:M-thick:D:Press *ENG [50 to 160 / 90 / 1 deg/step]
1-105-234 Glssy:Pln1:D:Prs *ENG
1-105-235 Glssy:Pln2:D:Prs *ENG
1-105-236 Glssy:MThk:D:Prs *ENG
1-105-237 F:Thick1:D:Press *ENG
1-105-238 F:SP1:D:Press *ENG
1-105-239 F:SP2:D:Press *ENG
1106 [FusingTemp Displ] Fusing Temperature Display (Heating or Pressure)
Displays the current temperature of the heating and pressure rollers.
1-106-001 F-Roller:Center ENG [–20 to 250 / 0 / 1 deg/step]
1-106-002 Fusing Roller:End ENG [–10 to 250 / 0 / 1 deg/step]
The heating roller has two lamps. One heats the center of the heating roller and the
other heats both ends of the heating roller.
1-106-003 P-Roller:Center ENG [–10 to 250 / 0 / 1 deg/step]
The pressure roller has a one lamp.
1108 [Ready Temp Set]
Japan use only
1-108-007 Ready Temp Time *ENG [22 to 60 / 43 / 0.1 sec/step]
1109 [Fusing Nip Chck]
1-109-001 Execute ENG [0 or 1 / 0 / 1]
Executes the nip band measurement
between fusing belt and pressure roller.
If the nip band width is not 8 mm, and
fusing is not good, replace the pressure
roller or install a new fusing unit.
5. System Maintenance Reference
284

Ricoh Aficio SP C440DN Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Processor	533 MHz
Supported Operating Systems	Windows, Mac OS, Linux
Weight	32 kg
Print Speed	Up to 42 ppm
Monthly Duty Cycle	150000 pages
Paper Input Capacity	650 sheets
Connectivity	USB 2.0
Paper Sizes	A4, A5, A6, B5, Legal, Letter, Executive
Dimensions	40 cm x 52.85 cm x 42 cm