1-159-001 SC Display *ENG [0 or 1 / 1 / 1]
Enables or disables the fusing consecutive jam (three times) SC detection.
0: No detection, 1: Detection
1201 [CPM Down Setting] DFU
1-201-001 Low: Down Temp. *ENG [-50 to 0 / -10 / 1 deg/step]
1-201-002 Low: Up Temp. *ENG [-50 to 0 / -7 / 1 deg/step]
1-201-003 Low: 1st CPM *ENG [10 to 100 / 80 / 5 %]
1-201-004 Low: 2nd CPM *ENG [10 to 100 / 65 / 5 %]
1-201-005 Low: 3rd CPM *ENG [10 to 100 / 50 / 5 %]
1-201-006 Unit Low Judge Temp. *ENG [0 to 100 / 65 / 1 deg/step]
1-201-007 High: 1st CPM *ENG [10 to 100 / 75 / 5 %]
1-201-008 High: 2nd CPM *ENG [10 to 100 / 50 / 5 %]
1-201-009 High: 3rd CPM *ENG [10 to 100 / 25 / 5 %]
1-201-010 Hi: 1-CPM DwnTemp. *ENG [160 to 240 / 210 / 1 deg/step]
1-201-011 Hi: 2-CPM DwnTemp. *ENG [160 to 240 / 215 / 1 deg/step]
1-201-012 Hi: 3-CPM DwnTemp. *ENG [160 to 240 / 220 / 1 deg/step]
1-201-021 Judging Interval *ENG [1 to 250 / 10 / 1 sec/step]
1801 [Motor Spd Adjust] FA
Low: 85 mm/s, High: 260 mm/s, Middle: 182 mm/s
1-801-001 Regist:Plain: Low *ENG [-4 to 4 / 0.4 / 0.1%/step]
1-801-002 Regist:Plain: High *ENG
1-801-003 Regist:M-Thick: Low *ENG
1-801-004 Regist:M-Thick: High *ENG
1-801-005 Regist:Thick1:Low *ENG [-4 to 4 / 0.7 / 0.1%/step]
1-801-006 Regist:Thick1:Mid *ENG
5. System Maintenance Reference
290
To Next Page
Loading...
