2-413-016 PTR:Low:2nd:S4 *ENG [1 to 100 / 11 / 1/step]
139 mm > S4 (Paper width)
2414 [PlnT:SizEnvCor:FC] DFU
Adjusts the size correction coefficient table for the paper transfer roller current for
each paper size. SP2403 and SP2407 are multiplied by these SP values.
Normal: 260 mm/sec, Low: 85 mm/sec
2-414-001 PTR:Normal:1st:S1 *ENG [1 to 100 / 22 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-414-002 PTR:Normal:2nd:S1 *ENG [1 to 100 / 17 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-414-003 PTR:Low:1st:S1 *ENG [1 to 100 / 35 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-414-004 PTR:Low:2nd:S1 *ENG [1 to 100 / 33 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-414-005 PTR:Normal:1st:S2 *ENG [1 to 100 / 11 / 1/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-414-006 PTR:Normal:2nd:S2 *ENG [1 to 100 / 16 / 1/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-414-007 PTR:Low:1st:S2 *ENG [1 to 100 / 35 / 1/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-414-008 PTR:Low:2nd:S2 *ENG [1 to 100 / 33 / 1/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-414-009 PTR:Normal:1st:S3 *ENG [1 to 100 / 11 / 1/step]
165 mm > S3 size ≥ 139 mm
(Paper width)
Engine SP Mode Tables - SP2000
315
To Next Page
Loading...
