2-421-001 PTR:Normal:1st *ENG [0 to 995 / 100 / 5%/step]
2-421-002 PTR:Normal:2nd *ENG
2-421-003 PTR:Low:1st *ENG
2-421-004 PTR:Low:2nd *ENG
2-421-005 SepaDC:Std:1st *ENG
2-421-006 SepaDC:Std:2nd *ENG
2-421-007 SepaDC:Low:1st *ENG
2-421-008 SepaDC:Low:2nd *ENG
2422 [Plain:SW Tmng:LE] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at
the paper leading edge between the erase margin area and the image area.
Std: 260 mm/sec, Low: 85 mm/sec
2-422-001 PTr:Std:1st *ENG [0 to 50 / 0 / 2 mm/step]
2-422-002 PTr:Std:2nd *ENG
2-422-003 PTr: Low : 1st *ENG
2-422-004 PTr: Low : 2nd *ENG
2-422-005 SepaDC:Std:1st *ENG
2-422-006 SepaDC:Std:2nd *ENG
2-422-007 SepaDC:Low:1st *ENG
2-422-008 SepaDC:Low:2nd *ENG
Engine SP Mode Tables - SP2000
317
To Next Page
Loading...
