2-449-001 PTr:Std:1st *ENG [0 to 50 / 0 / 2 mm/step]
2-449-002 PTr:Std:2nd *ENG
2-449-003 PTr: Low : 1st *ENG
2-449-004 PTr: Low : 2nd *ENG
2-449-005 SepaDC:Std:1st *ENG
2-449-006 SepaDC:Std:2nd *ENG
2-449-007 SepaDC:Low:1st *ENG
2-449-008 SepaDC:Low:2nd *ENG
2450 [Plain2: EnvCor]
2-450-013 TblSepaDC:Std:1st *ENG [1 to 100 / 30 / 1/step]
Adjusts the size correction coefficient
table of the plain 2 paper for the
discharge plate DC for each printing
side.
2-450-014 TblSepaDC:Std:2nd *ENG
2-450-015 TblSepaDC:Low:1st *ENG
2-450-016 TblSepaDC:Low:2nd *ENG
2-450-017 EdSepaDC:Std:1st *ENG [1 to 100 / 50 / 1/step]
Adjusts the size correction coefficient
table of the plain 2 paper for the
discharge plate DC (leading and
traiing edges) for each printing side.
2-450-018 EdSepaDC:Std:2nd *ENG
2-450-019 EdSepaDC:Low:1st *ENG
2-450-020 EdSepaDC:Low:2nd *ENG
2451 [Thin: Bias]
Adjusts the DC voltage of the discharge plate for thin paper.
Standard: 260 mm/sec, Low: 85 mm/sec
2-451-001 SepaDC:StdSpd:1st *ENG [0 to 6000 / 2000 / 10 -V/step]
2-451-003 SepaDC:LowSpd:1st *ENG
Engine SP Mode Tables - SP2000
329
To Next Page
Loading...
