2-473-001 PTr:Std:1 *ENG [0 to 995 / 100 / 5%/step]
2-473-003 PTr: Low: 1st *ENG
2-473-005 SepaDC:Std:1st *ENG
2-473-007 SepaDC:Low:1st *ENG
2474 [Thin:SW Tmng:TE] DFU
Thin: Switch Timing: Trailing Edge
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at
the paper trailing edge between the erase margin area and the image area.
Std: 260 mm/sec, Low: 85 mm/sec
2-474-001 PTr:Std:1st *ENG [0 to 50 / 0 / 2 mm/step]
2-474-003 PTr: Low : 1st *ENG
2-474-005 SepaDC:Std:1st *ENG
2-474-007 SepaDC:Low:1st *ENG
2480 [Thin: EnvCor] DFU
Thin: Environment Correction
Std: 260 mm/sec, Low: 85 mm/sec
2-480-013 SepaDC:Std:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the thin paper for the discharge
plate DC for each printing side.
2-480-015 SepaDC:Low:1st *ENG
[Thin: EdgeEnvCor]
2-480-017 SepaDC:Std:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the thin paper for the discharge
plate DC (leading and traiing edges) for
each printing side.
2-480-019 SepaDC:Low:1st *ENG
Engine SP Mode Tables - SP2000
335
To Next Page
Loading...
