2-657-001 PTr : 1st *ENG [0 to 50 / 0 / 2 mm/step]
2-657-002 PTr : 2nd *ENG
2-657-003 SepaDC:1st *ENG
2-657-004 SepaDC:2nd *ENG
2660 [Thick3: EnvCor] DFU
Thick 3 Paper: MM Environment Coefficient Adjustment
2-660-015 SepaDC:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the thick 3 paper for the
discharge plate DC for each printing
side.
2-660-016
SepaDC:2nd
*ENG
[TThick3:Ed-Env.Cor] DFU
2-660-019 SepaDC:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the thick 3 paper for the
discharge plate DC (leading and traiing
edges) for each printing side.
2-660-020
SepaDC:2nd
*ENG
2701 [MThick: Bias]
Adjusts the DC voltage of the discharge plate for middle thick paper.
2-701-001 SepaDC:StdSpd:1st *ENG [0 to 6000 / 2000 / 10 -V /step]
2-701-002 SepaDC:StdSpd:2nd *ENG
2-701-003 SepaDC:LowSpd:1st *ENG
2-701-004 SepaDC:LowSpd:2nd *ENG
2703 [MThick:Bias:BW]
Standard: 260mm/sec, Low: 85mm/sec
Adjusts the current for the paper transfer roller for middle thick in black-and-white
mode.
2-703-001 PTr:StdSpd:1st *ENG [0 to 230 / 20 / 1- A /step]
5. System Maintenance Reference
360
To Next Page
Loading...
