2-713-008 PTr:Low:2:S2 *ENG [100 to 995 / 200 / 5%/step]
194 mm > S2 size ≥ 165 mm (Paper
width)
2-713-009 PTr:Std:1Sid:S3 *ENG [100 to 995 / 135 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-713-010 PTr:Std:2Sid:S3 *ENG [100 to 995 / 390 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-713-011 PTr:Low:1:S3 *ENG [100 to 995 / 135 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-713-012 PTr:Low:2:S3 *ENG [100 to 995 / 390 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-713-013 PTr:Std:1Sid:S4 *ENG [100 to 995 / 220 / 5%/step]
139 mm > S4 (Paper width)
2-713-014 PTr:Std:2Sid:S4 *ENG [100 to 995 / 330 / 5%/step]
139 mm > S4 (Paper width)
2-713-015 PTr:Low:1:S4 *ENG [100 to 995 / 220 / 5%/step]
139 mm > S4 (Paper width)
2-713-016 PTr:Low:2:S4 *ENG [100 to 995 / 330 / 5%/step]
139 mm > S4 (Paper width)
2714 [MThick: SzCor: FC] DFU
Adjusts the size correction coefficient for the paper transfer roller current for each
paper size. SP2703 and SP2707 are multiplied by these SP values.
Standard: 260mm/sec, Low: 85mm/sec
5. System Maintenance Reference
362
To Next Page
Loading...
