Ricoh Aficio SP C440DN - Page 371

2-724-001 PTr:Std:1st *ENG [0 to 50 / 0 / 2mm /step]
2-724-002 PTr:Std:2nd *ENG
2-724-003 PTr: Low : 1st *ENG
2-724-004 PTr: Low : 2nd *ENG
2-724-005 SepaDC:Std:1st *ENG
2-724-006 SepaDC:Std:2nd *ENG
2-724-007 SepaDC:Low:1st *ENG
2-724-008 SepaDC:Low:2nd *ENG
2730 [MThick: EnvCor] DFU
Standard: 260 mm/sec, Low: 85 mm/sec
2-730-013 SepaDC:Std:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the middle thick paper for the
discharge plate DC for each printing
side.
2-730-014 SepaDC:Std:2nd *ENG
2-730-015 SepaDC:Low:1st *ENG
2-730-016 SepaDC:Low:2nd *ENG
[MThick:Ed-Env.Cor] DFU
2-730-017 SepaDC:Std:1st *ENG [1 to 100 / 50 / 1 /step]
Adjusts the size correction coefficient
table of the middle thick paper for the
discharge plate DC (leading and traiing
edges) for each printing side.
2-730-018 SepaDC:Std:2nd *ENG
2-730-019 SepaDC:Low:1st *ENG
2-730-020 SepaDC:Low:2nd *ENG
2751 [Special 1: Bias]
Adjusts the DC voltage of the discharge plate for special paper 1.
Standard: 260 mm/sec, Low: 85 mm/sec
Engine SP Mode Tables - SP2000
369