Ricoh Aficio SP C440DN - Page 383

2-811-009 PTr:Mid:1Sid:S3 *ENG [100 to 995 / 150 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-811-010 PTr:Mid:2Sid:S3 *ENG [100 to 995 / 270 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-811-011 PTr:Low:1:S3 *ENG [100 to 995 / 150 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-811-012 PTr:Low:2:S3 *ENG [100 to 995 / 270 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-811-013 PTr:Mid:1Sid:S4 *ENG [100 to 995 / 200 / 5%/step]
139 mm > S4 (Paper width)
2-811-014 PTr:Mid:2Sid:S4 *ENG [100 to 995 / 435 / 5%/step]
139 mm > S4 (Paper width)
2-811-015 PTr:Low:1:S4 *ENG [100 to 995 / 200 / 5%/step]
139 mm > S4 (Paper width)
2-811-016 PTr:Low:2:S4 *ENG [100 to 995 / 435 / 5%/step]
139 mm > S4 (Paper width)
2812 [SP 2: SzCor: FC] DFU
Adjusts the size correction coefficient for the paper transfer roller current for each
paper size. SP2803 and SP2807 are multiplied by these SP values.
Middle: 182 mm/sec, Low: 85mm/sec
2-812-001 PTr:Mid:1Sid:S1 *ENG [100 to 995 / 100 / 5%/step]
S1 size ≥ 194 mm (Paper width)
2-812-002 PTr:Mid:2Sid:S1 *ENG
2-812-003 PTr:Low:1:S1 *ENG
2-812-004 PTr:Low:2:S1 *ENG
Engine SP Mode Tables - SP2000
381