5-816-063 HTTP Proxy Host *CTL [up to 127 / - / 1/step]
This SP sets the address of the proxy server used for communication between the RCG
device and the gateway. Use this SP to set up or display the customer proxy server
address.
The address is necessary to set up the embedded RCG-N.
• The address display is limited to 128 characters. Characters beyond the 128
character are ignored.
• This address is customer information and is not printed in the SMC report.
5-816-064 HTTP Proxy Port *CTL [0 to 0xffff / 0 / 1/step]
This SP sets the port number of the proxy server used for communication between the
embedded RCG-N and the gateway. This setting is necessary to set up the embedded
RC Gate-N.
• This port number is customer information and is not printed in the SMC report.
5-816-065 HTTP Proxy Aut User *CTL [up to 31 / - / 1/step]
This SP sets the HTTP proxy certification user name.
• The length of the name is limited to 31 characters. Any character beyond the
31st character is ignored.
• This name is customer information and is not printed in the SMC report.
5-816-066 HTTP Proxy Aut Password *CTL [up to 31 / - / 1/step]
This SP sets the HTTP proxy certification password.
• The length of the password is limited to 31 characters. Any character beyond the
31st character is ignored.
• This name is customer information and is not printed in the SMC report.
5-816-067 Cer Updt Cond *CTL [0 to 255 / 0 / 1/step]
Displays the status of the certification update.
Engine SP Mode Tables - SP5000
441
To Next Page
Loading...
Need help?
General
