5-816-013 RFU Timing *CTL [0 or 1 / 1 / 1/step]
0: Any status of a target machine
1: Sleep or panel off mode only
Selects the timing for the remote firmware updating.
5-816-014 RCG Error Cause CTL [0 or 1 / 0 / 1/step]
0: Initial state, normal condition
1: Error
Displays RCG connection error. cause
5-816-021 Function Flag *CTL [0 or 1 / 0 / 1/step]
0: Installation not completed
1: Installation completed
This SP displays the RCG-N installation end flag.
5-816-023 Connect Mode (N/M) *CTL [0 or 1 / 0 / 1/step]
0: Internet connection
1: Dial-up connection
This SP displays and selects the RCG-N connection method.
5-816-061 Noti Time Expire Timing *CTL [0 to 0xffffffff / 0 / 1/step]
Proximity of the expiration of the certification.
5-816-062 HTTP Proxy Use *CTL [0 or 1 / 0 / 1/step]
0: Not use
1: Use
This SP setting determines if the proxy server is used when the machine communicates
with the service center.
5. System Maintenance Reference
440