35
Module mismatch – Module on SD
card is not for this machine
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct update
data then install again.
36
Cannot write module – Cause other
than E34, E35
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct update
data then install again.
38
The version of the downloaded
program error
The version of the downloaded program has not
been authorized for the update.
Make sure that the program for updating is the
specified version.
40
Engine module download failed Replace the update data for the module on the SD
card and try again, or replace the BCU.
44
Controller module download failed Replace the update data for the module on the SD
card and tray again, or replace controller board.
49
Firmware updating is currently
prohibited.
The setting of Update Firmware in the Administrator
Tools has been set to [Prohibit] by an administrator.
Change the setting to [Do not Prohibit] and try
again.
50
Electronic confirmation check failed SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct update
data then install again.
Firmware Update
549
To Next Page
Loading...
