FX-20
3. Select Modulation / Receiver Type (Mo-
dula-
tion MULTI)
4. Bind receiver to transmitter
Switch on transmitter and select to „Radiate“.
During the RF Pairing or Binding process, no other 2.4 GHz
transmitters should be turned on in the vicinity.
Press the „LINK“ button on the receiver for 2 seconds.
Observe the receiver LED to ensure that the Pairing was made.
Programming example
61
1Sek.
1x
1x
1x
1x
1x
To Next Page
Loading...
