EasyManua.ls Logo

ROBBE FX-20 - Receiver Output Configuration for Aircraft

ROBBE FX-20
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FX-20
2.5 RECEIVER OUTPUT CONFIGURATION FOR AIRCRAFT Key: control terminology
1 Ail: 1 aileron
2 Ail: 2 ailerons
2 Ail+1flap : 2 ailerons + 1 camber flap
2 Ail+2flap 2 ailerons + 2 caqmber flap
2 Ail+2flap+2brakes: 2 ailerons + 2 flaps + 2 airbrakes/spoilers
Only Multi ch.: only at Frequency “MULTI”
V1 Spoiler Virtual channel 1-4, used for control
functions, e.g. Ailvator
NEW SYSTEM FOR FUNCTION ASSIGNMENT
The choice of model type serves as the basis for the mixer
functions and the model type selection will automatically sug-
gest the mixer functions and the channel assignment. We re-
commend that when possible, to retain these as it keeps an
output layout standard. Nevertheless, any control input may be
assigned to any channel.
The ‘FUNCTION’ menu will clearly display to which output the
appropriate servo must be connected and which input will con-
trol it. On functions that require 2 or more servos, the relevant
control will also be configured.
Within a model type, there is only a small variation in configu-
ration; due to the number of control surfaces only the number
of servo channels used will increase.
This is different when changing a model type. If the model
type is for example changed from conventional tail to a tail
with 2 servos (Ailvator) the function allocation will be forced
to change.
This is also true with glider models, with and without motors, as
well as for flying wing.
General
8
Model type Power model
Rx output 1 aileron 2 aileron 2 ail+1flap 2 ail+2flap
1 Aileron Aileron Aileron Aileron
2 Elevator Elevator Elevator Elevator
3 Throttle Throttle Throttle Throttle
4 Rudder Rudder Rudder Rudder
5 Retract Retract Retract Retract
6 free Aileron 2 Flap Aileron 2
7 free free Aileron 2 Flap
8 only Multi ch. only Multi ch. only Multi ch. Flap 2
9 - V1 Spoiler V1 Spoiler V1 Spoiler
Tipo de modelo: Aeromodelo planeador
Rx output 1 aileron 2 aileron 2 ail+1flap 2 ail+2flap 2Ail+2flap+2brakes
1 Aileron Aileron Aileron Aileron Aileron
2 Elevator Elevator Elevator Elevator Elevator
3 Throttle Throttle Throttle Throttle Rudder
4 Rudder Rudder Rudder Rudder Aileron 2
5 free free free free Camber Flap
6 free Aileron 2 Camber Aileron 2 Camber 2
7 free free Aileron 2 Camber Brakes
8 only Multi ch. only Multi ch. only Multi ch. only Multi ch. Brakes 2
9 - V1 Spoiler V1 Spoiler V1 Spoiler V1 Spoiler

Table of Contents

Related product manuals