EasyManua.ls Logo

ROBBE FX-20 - 23 Accessories

ROBBE FX-20
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FX-20
23. ACCESSORIES
Power
Peak B6 EQ-BID No. 8561
Inexpensive and compact 12V charge-discharge station with
battery management for 1…14 cell NiCad/NiMH batteries,
1…6 cell LiIo, LiPo or LiFe batteries, as well as 2...12V lead-
acid batteries. With integral Equalizer and BID-system in high
quality metal case. Including 230V AC/ 12V DC mains power
supply, extensive accessories and alloy case.
S-BUS PWM Adapter SBD-1, 1 -> 3 No. F1695
Allow the fitting of the new S-BUS system to existing models
and servos. Adapter for connecting 3 standard servos to the
S-BUS. Converts the signal for each output separately from
S-BUS to PWM .and the outputs may be assigned the same or
different channel numbers. The outputs assignment is made
either by PC or PC Link software or the handy, PC independed
S-BUS Programmer SBC-1.
S-BUS
Kanal Programmer SBC-1 No. F1696
Handy programmer to allocate the S-BUS channel numbers to
S-BUS servos or S-BUS PWM adapters
89
Trainer cord
No. F1591
Skysport T4YF, T4EX, FF9,
T12Z, T14MZ, FX-40, FX-30
Y-lead No. F1423
To connect two servos in
parallel, to one receiver out-
put socket.
Receiver battery charge
lead
No. F 1416
T12FG transmitter battery
charge lead
No. 8260
Adaptor lead for use with
flight simulators
No. 8239
Skysport T4YF, T4EX, FF9,
T12Z, T14MZ, FX-40,FX-30
Accu monitor No. 8409
The robbe 8-LED Battery
Monitor is an accurate digital
Voltmeter to monitor of re-
ceiver batteries with 4.8 V
or 6 V nominal voltage (4 or
5-cell
NC / NiMH battery).
Power Peak I4 EQ-BID No. 8507
The ultimate, fourth generation intelligent charging station
and incorporating convenient battery management. For
charging and discharging NC, NiMH, Lead and LiFe, LiIo,
LiPO batteries, with integral equalizer and Cap touch ope-
rating system.
Cell counts
NC batteries: 1 … 30 cells
NiMH batteries: 1 … 30 cells
Lead-acid batteries: 1 … 6 cells
Lithium batteries: 1 … 12 cells
Charge current: 0,1 ... 10 A ((max. 210 W)
Discharge current 0.1 … 5 A (max. 50 W)
Power Peak TRIPLE EQ-BID No. 8541
Compact TRIPL3 charger-discharger with battery manage-
ment for 3 x 1…14 cell NC/NIMH batteries, 3 x 1…6-cell LiIo,
LiPo or LiFe batteries as well as 3 x 2…12V lead batteries.
With 3 integrated equalizers and 3 BID systems.

Table of Contents

Related product manuals