FX-20
Servo S 9070-SB
No. F1630
Fast and powerful universal digi-
tal servo with double ball-raced
metalgear Low profile, only 23
mm high. Appropriated for the
operation with 2 LiPo-cells.
The servo is connected via a se-
parate adapter (CIU-2) to a USB
interface on the PC for programming. Besides the normal
adjustments like servo throw and end points, reversing and
servo neutral as well as the acceleration and speed characte-
ristics can also be adjusted. The new system is the perfect
way to cater for coming developments. It is possible to assign
the servo with an ID address and channel number for future
applications
Servo S 9071-SB
No. F1626
The gearbox features twin ball-
races, and an indirect drive sy-
stem to couple the gearbox to
the special potentiometer with
6-finger wiper. It is designed as a
swash-plate servo for micro and
mini helicopters, but suitable for
small applications where power
and speed is also needed at the
same time.
Servo S 3171-SB
No. F1624
S-BUS nano-size digital servo
with the sensational torque of
46 Ncm from a servo only 10.8
mm wide. The robust five-stage
gearbox features four metal
gears; two widely spaced ball-
races support the output gear
effectively against radial forces.
The robust five-stage gearbox
features four metal gears; two widely spaced ball-races sup-
port the output gear highly effectively against radial forces.
Although designed for four-cell operation, the servo can also
be used with a BEC circuit or, with up to 6 Volts with a 6-Volt
limiter and a battery backer. An ideal wing-mounting servo,
even for quite large gliders and competition machines, as well
as mini and micro-helicopters. Programmable!
Wireless Trainer System No. F1414
The WTR7 is a Wireless Trainer System designed for 2,4 GHz
FASST radios and replaces the Trainer Lead with a radio sy-
stem. The Receiver is connected to the Trainer socket of the
Teacher transmitter, thereafter the 2,4 Ghz FASST Pupil trans-
mitter is bound to it. Transmission is made in 7-channel mode
set in the Teacher Tx. The range of the system is approximately
100m. A very convenient alternative solution that make the ti-
resome Trainer Cord a thing of the past. Also different FASST
pupil Tx can be bound very quickly to it.
Aluminium Transmitter Case Futaba Aeroteam
No. 8899
Spacious aluminium case suitable for all current robbe-Futaba
transmitters in transmitter tray and stick switches. Features
printed robbe-Futaba AERO-TEAM logo. Universal internal
layout with separate stickers for FF-8, FF-9, FF-10, T12FG,
FX-30, for the custom look.
90
USB Adapter CIU 2
No. F1405
USB adapter for adjusting the
servo, gyro and speed control-
ler parameters via a PC. Sui-
table for Windows Vista / XP /
2000
SMM Gyro GY520
No. F1244
Ultra small and light AVCS heli
gyro with the latest MEMS sen-
sor technology.
Rx Capacitor 1800 uF
No. F1621
Minimises voltage breaks to
the receiver. Which can lead to
short breaks in power supply.
Capacitance 1800 uF
Rx Capacitor 22.000 uF
No. F1622
Minimises voltage breaks to
the receiver. Which can lead to
short breaks in power supply.
Capacitance 22,000 uF
Spare Tx battery FX-20/ FX-30
No. 4846
LiPo battery with integral electronics to guard against deep-
discharge and overcharging. With integral Equalizer function.
To Next Page
Loading...
