Roche Cedex HiRes - Data Exchange; Export

95
Software
D
D
6.2 Data Exchange
The Data Exchange function allows for the exchange of measurement data between different Cedex Software 2.2
Databases (DBs). The user can export selected data from one Cedex Software 2.2 DB and import it into another.
6.2.1. Export
In order to exchange data between systems, the data fi rst needs to be exported from the system on which it was
created to external storage.
To export data, proceed as follows:
1
Select the Data Exchange option in the Functions menu of the Cedex Control Center.
2
Select Export. The Measurement List window will appear with an Export To DB button located at the
bottom of the window.
3
Select a single measurement from the list by clicking on the fi eld to the left of the appropriate line.
To choose a set of measurements, hold down the <Ctrl> button while selecting the appropriate lines.
Alternatively, the desired measurements can be searched for using fi lter criteria.
4
Click on Export To DB to open the Export To External DB window.
5
Enter the path under which the export fi le should be stored in the Location area. Alternatively, the button
on the right of the entry fi eld opens a window in which the path of the database fi le can be directly selected.
Click on OK. The Export To External DB window will reappear.
6
Click on Export to start the exporting process. A message window will appear as soon as export has been
successfully completed. Click on OK.
7
Close the Export To External DB window by clicking on .
■
A default entry for the path under which the export fi le should be stored can be entered in the System Options
under the Setup menu. Open the Data Exchange tab and look for the ExportPath parameter. In the Va l u e
column, enter the default path (see list of User Preferences and System Options in the Appendix).
The following message may appear after selecting the measurements to be exported and clicking on the
Export button:
Figure 70
If this message appears, click on Yes to confi rm the message and install the certifi cate. The export will continue
after confi rming the installation of the certifi cate.
General Functions of the System
Data Exchange