Roche Cedex HiRes - Setting the Cedex Server to Autostart

32
Cedex HiRes Analyzer Operator’s Guide
B
B
13
After installation of the software, the Installation Complete window will appear. Click on Close to confi rm.
Figure 16
14
The Setup Succeeded window will appear if the installation was completed successful. Confi rm with OK.
Figure 17
15
Test and Archive certifi cates are automatically installed into the “Trusted Root” certifi cate store during setup.
■
4.1.1. Setting the Cedex Server to Autostart
The Cedex Server must be started before the Cedex Client software can be started. If desired, the Cedex Server
can be confi gured so that it starts automatically when the computer is turned on. To confi gure the Cedex Server
to autostart, do the following:
1
Open a Windows explorer window by right-clicking with the mouse on the Windows Start button and
selecting Open All Users.
2
Copy the shortcut Cedex Server from the Start menu Programs/Cedex 2.2 to the Startup folder
(found in the Start menu under Programs/Startup).
3
Open the properties window for the Cedex Server by right-clicking on the icon and selecting Properties.
Select the Shortcut tab and change the property for Run to Minimized via the drop-down menu.
■
Installing Cedex HiRes Software 2.2 or Updating to Cedex HiRes Software 2.2
Installing the Cedex HiRes Software 2.2