74
Cedex HiRes Analyzer Operator’s Guide
D
D
2 Using the Measurement List
Data from measurements that have been carried out and stored in the database can be accessed via the
Measurement List window. Open the Measurement List window by either clicking on the List button in the
Shortcuts area of the Cedex Control Center or by selecting Measurement List in the Measurements menu at
the top of the Control Center. Measurements are stored in the order in which they were carried out, with the
most recent measurement placed at the top of the list.
Two types of information can be displayed in the list of measurements: information about sample and process
parameters and information about some results. If there is no check in the Show measurement results box at
the bottom left-hand corner of the window, sample and process parameters for measurements are displayed
(see Figure 53, below).
Figure 53: Measurement List window displaying the Sample Identifi cation and Process Parameters
To see measurement results in the list, click on the check box next to Show measurement results (see Figure
54, below). By default, the list displays the results for total cell concentration, viable cell concentration and
viability. Other results, such as Average Diameter or Compactness, can be added for display in the result list of
the Measurement List window via the User Preferences (see “
Adjusting Result Display in the Measurement List
and Multi Run windows”).
Figure 54: Measurement List window with the option Show measurement results selected
Using the Measurement List
To Next Page
Loading...
