Roche Cedex HiRes - Restore; Deleting Archived Data

120
Cedex HiRes Analyzer Operator’s Guide
D
D
Administrator Functions
Archiving Data
7.6.2. Restore
To restore measurement data, follow the instructions below:
1
Open the Functions menu in the Control Center and go to the Archiving menu.
2
Click on the Restore function within the Archiving menu to open the Restore window.
3
The path of the fi le that is to be restored is entered in the Location area. The button on the right of the
entry fi eld opens an explorer window in which the path of the fi le can be selected directly. Click on Open
and the Restore window will reappear.
4
Click on Restore to start the restoring process. A message window will appear as soon as the information
has been restored successfully. Click on OK.
5
Close the Restore window by clicking on .
■
7.6.3. Deleting Archived Data
Only data that has been archived can be deleted from the Cedex HiRes System Database. Archived data still
located in the database can be searched for and displayed in the upper right-hand corner of the Measurement
List window.
Figure 77: Measurement List window with archived measurement shown
To delete archived data, do the following:
1
Click on the Archived measurements(s) check box in the upper right-hand corner of the Measurement
List window.
2
Click on Find to display archived measurements. Highlight measurements to be deleted by clicking on the
fi eld on the left of the appropriate line. When choosing a set of measurements, hold the Ctrl button down
while selecting the appropriate lines.
3
Click the check-box beside Delete records if all measurement data is to be deleted from the system Database.
If the option Delete only images is chosen, all data apart from the images will stay in the system Database.
4
Click on the Delete button to delete selected measurements from the Control Unit database.
■