28
Cedex HiRes Analyzer Operator’s Guide
B
B
4 Installing Cedex HiRes Software 2.2 or Updating to
Cedex HiRes Software 2.2
The Cedex HiRes Software 2.2 is pre-installed on the computer delivered with the Cedex HiRes System. This
chapter provides instructions for installing the Cedex HiRes Software 2.2, should it be required. In addition,
instructions are provided for updating older Cedex HiRes Software 2 versions to Cedex HiRes Software 2.2.
4.1 Installing the Cedex HiRes Software 2.2
Before carrying out any form of installation or update procedure, the actual (effective) values for the Flow-
Factor and ChamberHeight must be noted down and stored for future reference! These values may need
to be adjusted in the System Options after the installation or update procedure is complete. The value for
FlowFactor is located in the System Options menu under the General tab. The value for the ChamberHeight
is located in the System Options menu under the Hardware tab. See the chapter “System Options and User
Preferences” in the Appendix for more information.
The Cedex HiRes Software 2.2 must be installed from a Windows account with administrator privileges (e.g.,
Win-Admin, see “Securing Access Rights”)
The Cedex HiRes Software 2.2 requires a Firebird database server, which is installed automatically during
the setup process.
To install Cedex HiRes Software version 2.2, do the following:
1
Run the Cedex 2.2.1.exe from the install CD by double-clicking on it.
2
A window will open asking for confi rmation of the installation of the Firebird database software:
Figure 4
3
Confi rm the dialog with OK. The Firebird database software will be installed or updated:
Figure 5
4
After completion of the installation of the Firebird database software, the setup will ask for confi rmation of
the installation of the .Net Framework:
Figure 6
Installing Cedex HiRes Software 2.2 or Updating to Cedex HiRes Software 2.2
Installing the Cedex HiRes Software 2.2
To Next Page
Loading...
