105
Software
D
D
7.2.2. Assigning New Passwords
Follow the instructions below:
1
Click on User and Rights management, and the User Rights Management window will appear.
2
Open the All Users main menu and right click on the user account menu that is to be edited.
3
Click on Edit the user and the User Account window will appear.
4
Enter new password in the corresponding line (Password).
5
Click on Save to store the change.
■
7.3 Assigning Work Areas
The analysis results from a measurement are organized in work areas. A user needs to be assigned to at least
one work area to be able to run a measurement, otherwise an error message will appear. All measurement data
produced by this user will be saved in the work area selected during the execution of measurements. The user
can only work with measurement data from work areas to which he has been assigned. New work areas can be
created and assigned to one or more users via the User Rights Management area.
Follow the instructions below to create and delegate work areas:
1
Click on User and Rights management. The User Rights Management window will appear.
2
In the All Users main menu, open the user account menu that is to be assigned the work area. A User
Workareas sub-menu will become available.
3
Open the All Workareas main menu and drag the desired work area into the User Workareas sub-menu.
This work area will be added to the user account.
■
To later deny access to a work area, follow the instructions below:
1
Open the User Workareas sub-menu in the user account that is to be modifi ed.
2
Right click on the work area that is to be removed and click on Remove the workarea from the user.
Administrator Functions
Assigning Work Areas
To Next Page
Loading...
