93
Software
D
D
6 General Functions of the System
The Cedex Control Center offers users with the appropriate rights access to a set of functions in addition to the
basic functions of analyzing, modifying and reprocessing samples and measurement results. These functions
allow for easy and user-friendly operations with the Control Center, although some functions may only be
available to the Administrator (see “Administrator Functions”).
6.1 Data Management
6.1.1. Printing Reports
The main Report menu is located directly on the menu-bar of the Cedex Control Center; this menu serves as
direct access to the report functionality for all of the different reports. In addition, Print Report buttons can
be found in all of the appropriate windows (e.g. Measurement List, Audit Trail etc.). Pre-confi gured report
templates can be selected for printing reports, and new templates can be created.
The following information can be printed out:
Operational data
Allows the user to track a device’s operating hours, number of measurements and liquid consumption.
Measurement data
Contains information about measurement parameters and calculated results, e.g., sample identifi cation
data, name and parameters of the Cell Type used, calculated measurement result data etc. Select the desired
option for the form in which the result data should be printed via the Name drop-down menu in the Report
Template for the measurement report. Options include:
Standard (standard measurement report without details)
Full Details (full report including detailed images, results and histograms)
List (for multiple measurements displayed in a list)
Measurement audit trail (measurement report with audit trail entries)
Multiple long (for multiple measurements printed one after the other)
System confi guration parameters
Provides a list of system parameters as displayed in the System Options.
Audit trail
Provides a statement of all user initiated activities and related data.
Automatic adjustment and alignment verifi cation
Presents results from the automatic adjustment of focus, brightness and white/black balance and the
automatic verifi cation of the fl ow chamber alignment for the scanner.
General Functions of the System
Data Management
To Next Page
Loading...
