70
Cedex HiRes Analyzer Operator’s Guide
D
D
1.3 Image Area
1.3.1. Viewing Individual Cell Images
The Cedex HiRes Software 2.2 enables a close view of a single image or an enlarged display for evaluation.
Individual images can be viewed in the Image area of the Measurement window. The results from the individual
images are listed at the bottom of the Measurement window in the Result Data area. When a row with the
results of a particular image is highlighted in this section, the image connected with those results is displayed in
the Image area at the top right-hand corner of the Measurement window. To see a different image in this area,
click on a different row in the Result Data area.
Only one image is displayed in the Image area in the Measurement window. Alternatively, an overview of all
cell images can be displayed by clicking on the Image List button beneath the Image area, which will display
the Image List window containing thumbnails of all of the images used for the calculation of results (see Figure
51, below).
Figure 51: Image List window showing all images used for the analysis
Double-click on an image in the Image List window to open a new window, called the Image View. This
window contains an enlarged version of the selected image, as well as some further options for viewing the
image. Double-clicking on the image displayed in the Image area of the Measurement window will also open
the Image View window.
Using the Measurement Results Window
Image Area
To Next Page
Loading...
