31
System Description
B
B
10
A window showing the progress of the installation will appear as shown below:
Figure 13
11
During the installation, the following Cedex 2.2 Confi guration window will appear:
Figure 14
To continue with the installation, certain actions must be carried out in this window:
1) a password for the Database User must be entered,
2) the serial number of the Cedex HiRes Analyzer must be entered, and
3) the system settings must be verifi ed.
Do the following:
a. Enter cedex as the password for the database access (a database user, CEDEXUSER, is automatically
created with that password). Write down the password for future reference!
b. Enter the serial number of your Cedex HiRes Analyzer.
c. Verify the Cedex System Type in the Cedex System identifi cation group box.
d. Uncheck the use Multi Sampler checkbox if you don’t have a Multi Sampler.
e. Enter a description of your system in the Cedex System identifi cation group box.
12
After completing all steps in the Cedex 2.2 Confi guration window, the Next button will become active.
Click on the Next button to continue the installation.
Figure 15
Installing Cedex HiRes Software 2.2 or Updating to Cedex HiRes Software 2.2
Installing the Cedex HiRes Software 2.2
To Next Page
Loading...
