Roche Cedex HiRes

To Previous Page

Published by

Roche Diagnostics GmbH

Sandhofer Straße 116

68305 Mannheim

Germany

www.roche-applied-science.com

06412807001



0511

Main Page

Table of Contents9
Contact Addresses15
Prologue15
Revision History15
Copyrights16
Declaration of Conformity16
Intended Use16
- VIII. Software License Agreement17
Trademarks16
Warranty16
Contents of this Operator's Guide20
Conventions Used in this Guide20
Preamble20
FCC Notiﬁ Cation21
- XIII. Warnings and Precautions22
XIV. Disposal of the Analyzer23
A Overview25
Description of the Cedex Hires System26
The Measurement Procedure27
Data Analysis28
Technical Speciﬁ Cations of the Analyzer29
B System Description31
Installing the Cedex Hires System31
Choosing a Suitable Location32
- Connecting or Disconnecting the Device32
Connecting Hardware Components33
- Completing the Windows Mini-Setup33
Installing Cedex Hires Software 2.2 or Updating to Cedex Hires Software 2.234
- Installing the Cedex Hires Software 2.234
  - Setting the Cedex Server to Autostart38
- Starting up the Software39
- Updating Older Cedex Hires Software Version 2.X to Cedex Hires Software 2.240
Starting the Cedex Hires System after Installation45
Securing Access Rights46
- Access Control at the Windows Operating System Level46
- Access Control at the Cedex Hires System Software Level46
C Operation47
Overview of the Cedex Control Center47
- Menu Bar47
- System Menu47
- Measurement Menu48
- Functions Menu48
- Reports Menu49
- Master Data Menu49
- Setup Menu49
- Help Menu50
- Shortcut Area50
- Tracking of Status of Events Carried out by the Analyzer50
Preparing the Analyzer for Measurements51
- Switching on51
- Logging in at the Computer Operating System Level51
- Starting the Cedex Hires Software 2.251
- Performing a HW Startup and Prime52
- Preparing the Reagent Kit53
  - Installing or Changing the Reagent Kit53
  - Reﬁ Lling Containers Individually54
- Checking the Analyzer55
Carrying out a Single Measurement56
- Opening the Measurement Window and Specifying the Operating Mode and Sample Data57
- Deﬁ Ning the Measurement and Analysis (Process) Parameters58
- Preparing the Sample and Attaching It to the Multi Sample Tray or Sample Port59
  - Starting the Measurement59
  - End of Measurement60
- Interrupting a Measurement61
Working with the Multi Sampler62
- The Multi Sampler Defaultcup63
- Preparing the Measurement64
- Carrying out Measurements with the Multi Sampler65
- Interrupting a Multi Run69
- Disruption of Measurements69
- Results70
  - The Multi Run Result List70
Switching off the Cedex Hires Analyzer71
- Carrying out an LM Shutdown and HW Shutdown71
- Logging out72
- Shutting down the Control Center72
  - Software73
Using the Measurement Results Window73
- Result Data Area74
- Sample Parameters and Processing Parameters Areas75
- Image Area76
Using the Measurement List80
- Viewing Analysis Results81
- Searching for Measurements81
Editing Existing Analysis Results/Data Sets82
- The Reprocess Button82
- Effective Data Sets83
Graphical Display of the Analysis Results84
- Enlarging the Histograms84
- Aggregate Histogram85
- Cell Diameter Histogram87
- Object Diameter Histogram88
- Deﬁ Ning Diameter Intervals in the Diameter Histograms88
- Compactness Histogram89
- Measurement Statistics Histogram90
Cultivation Time Chart91
- Creating a CTC View91
- Creating a Cultivation Time Chart95
General Functions of the System99
- Data Management99
  - Printing Reports99
  - Export to Fi Le100
- Data Exchange101
  - Export101
  - Import102
- Viewing and Evaluating the Audit Trail File102
- User Preferences103
- Changing Own Password105
Administrator Functions106
- Administration of User Accounts106
- Password Management110
  - Specifying Password Characteristics110
  - Assigning New Passwords111
- Assigning Work Areas111
- The System Options112
- Adjustment of the Image Analysis Using the Live Operator116
- Archiving Data125
Cleaning and Maintenance Check List127
E Maintenance and Care127
Scheduling Automatic Cleaning Routines128
Daily and Manual Maintenance and Cleaning Routines129
- Checking the Reagent Containers When Manually Reﬁ Lling129
- Cleaning Routines Carried out by the Liquid Management130
- Scanning the Chamber to Verify the Effectiveness of Cleaning Routines132
Automatic Adjustment and Alignment Veriﬁ Cation134
Syringe Maintenance136
- Removing the Syringe136
- Assembling and Installing the Syringe137
- Maintenance of the Syringe Guide and Spindle138
Maintenance of the Flow Chamber, 8-Way Valve and the Remaining Hardware Components139
Operational Data139
The System Suitability Test (SST)140
- Creating SST Checkpoints140
- Performing an SST143
  - Performing an SST with Measurements143
  - Performing an SST Without Measurements144
- Tracking Trends in SST Results over Time145
  - Tracking Trends in SST Checkpoints with Measurements145
  - Tracking SST Checkpoints Without Measurements147
- Locking - Unlocking the System148
Diagnosis of the Cedex Hires Analyzer149
F Troubleshooting149
The System Audit Trail File150
Trace and Logging150
G Appendix151
System Options und User Preferences151

Roche Cedex HiRes - Page 166

Table of Contents

Related product manuals