To
merge Track 4 onto Track
3:
(1) Press [CUT].
This button is located underneath the top cover.
The screen
at
right will
appear
in the PR-300's
display.
CUT
..
QUANTIZE
CUT
t'1
Tt-·
~
1-End
!=tIl
(2) Press
TRACK
4.
This specifies the Track to
be
cuL
(3) Press [ENTER] to
cut
Track
4.
This removes all MIDI information from Track 4.
o 0 0 0 0
-_
....
~
T
Make sure this field is set to "MER"
(Merge), NOT "INS" (Insert).
(4) Press [PASTE].
This
tells
the
PR·300
what
to
do
with
the
information removed from Track 4.
There
are
two
different
Paste
options; "MER"
(Merge)
and
"INS" (Insert).
If
"MER"
doesn't
appear
at
the beginning
of
the second line in the
display, press [BEAT] to move the ".-" prompt to
the beginning
of
the second line (if necessary) and
rotate the alpha-dial to select "MER".
PASTE
..
ERASE
P!=tSTE
H'1EF.~
.
t'1
Tt-·
Pat-·+"
1 !=tIl !=tIl
(5) Press TRACK 3.
This specifies the track to be merged to.
(6) Press [ENTER].
The PR-300 will take the information removed
from Track 4 and merge
it
with information on
Track 3.
Now that the infonnation previously on Track 4 is
merged with infonnation on Track 3, it's possible to
sequence the flute descant.
66
TRANSPOSE
rj::::::!:!!:!!::::1
To Next Page
Loading...