Then, the correct organ registration and PR-300
sounds will
be recreated every time
the
sequence is
played.
(10)Play the song you wish to record.
In the event that the song is too long
for
the PR-300
to record, the display will read "MEMORY FULL -
PRESS STOP".
(ll)When
you
are
finished playing, press
General
Cancel [0] on the organ.
(12) Press [STOP] on the PR-300 to stop recording•
The light above the TRACK 1 button will
be green,
indicating
that
it is
storing
the song
you
just
recorded.
To
playback your sequence:
(1) Press [RESET] to
return
the PR-300 to the first
measure
of
the sequence.
(2) Press [PLAY] to
start
playback.
The
PR-300
will
playback
the
song
you
just
recorded.
Press
[STOP]
at
any
time
to
stop
playback.
Saving a Sequence
to
Disk
The sequence
you
just recorded is stored in the PR-
300's memory. It can
be played back or added at
this time.
However, when you turn the PR-300
off,
this
sequence will
be erased. For this reason, you can
save
sequences
to 3.5" floppy disks.
Once
a
sequence
has
been
saved
to a disk,
it
can
be
recalled and played at any time.
31
..
•
PLAY
Press [RESET] then press
[PLAY] to hear the
sequence you've just
recorded.
To Next Page
Loading...