V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Control and Display Elements
Description
>>> continued
Except for entries, e.g. frequency, and in
the channel editing menu, actuation of
the ENT key assigns to the softkeys (16)
the following functions:
IND Fast switchover of bargraph func>
tion (level / tuning indication, see
3.1.20.1)
NTCH Switching the notch filters on or
off (see 3.1.20.2)
NB Switching the noise blanker on or
off (see 3.1.20.3)
SQ Switching the syllable squelch on
or off (see 3.1.20.4)
PAMP Switching the preamplifier on or
off (see 3.1.20.5)
The status for the individual functions is
indicated in the status line (2). Activation
of a function is indicated by a black bar.
The function SQ is only effective in the SSB
mode. In the ISB mode the notch filters
only act upon the monitoring sideband.
After actuating key GET the following
appears in the display field (36):
SELECT ADR 11 23 56 67 98 >
11, 23, 56, 67 and 98 are the last stored
slave addresses (= selection menu).
The required slave address is entered via
the numeric keypad (27) or via the selec>
tion menu (see 3.1.23.2). Via the numeric
keypad the addresses 1 to 9 can be en>
tered. The master receiver takes over the
setting of the receiver with the entered
address.
The stored slave addresses can be altered
acc. to 3.1.23.3.
Control or display
element
DesignNo.
26
Pushbutton with
protective cap
(10.5¥10.5 mm)
GET
for EK 896 only
6164.0717.02_01
> 3.85 >
To Next Page
Loading...
