Rohde & Schwarz 890 Series - Page 203

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f Control and Display Elements
Description
>>> continued
If the LED assigned to the BFO key (28) is
illuminated, the BFO frequency can be
inverted by using the ± key.
In addition the operator may be
prompted via the menus (see display field
[36]) to enter via the numeric keypad a
f digital threshold,
f DIGI GAIN value,
f frequency offset,
f start frequency,
f stop frequency,
f stepwidth,
f channel,
f start channel,
f stop channel,
f dwell time,
f hold time,
f slave address,
f IF frequency,
f password,
f level squelch threshold or
f syllabic squelch threshold
Control or display
element
DesignNo.
27
6164.0717.02_01
> 3.87 >